Mercury is a poisonous substance, which slowly kills. ( more information on ARTICLES )

Twenty three reasons to replace the so called luminescent economical and compact lamps, which are truthfully poisonous mercury-phosphorous, with our LED lamps:

1. Save twice or even triple the amount of energy.
2. Last up longer up to 50 times
3. Environmentally friendly. No mercury, phosphorus or ultraviolet radiation.
4. Does not create an elecrtomagnetic ballast, especially electronic ones, which acts as a transponder, while the mercury acts as an antenna.
5. The copper of the elecrtomagnetic ballast can be recycled into a secondary metal.
6. There is no light blinking and as a result, no stroboscopic effect that is dangerous on machine tools, even if they have an electronic ballast, because they powered by a direct current.
7. They can withstand a hundred times more activations than mercury lamps, which makes them more suitable in motion sensors.
8. The brightness reduction is insignificant at lower and even freezing temperature, while mercury lamps lose a significant amount of brightness.
9. Instant full brightness, while mercury lamps give light only after a second of activation at 60-70% brightness and full 100% only after 3-5 minutes.
10.A smaller starting current, which increases the life of the motion sensor relays.
11. High overload capability, which is important in the event of strong interference or during a storm.
12. Can be repaired, which is important for work after the warranty period has expired.
13. The light spectre is closer to the sun's, while more information on mercury lamp's light spectre can be found lower, with more details under the "articles" section.
14. Can be renovated, like have the LEDs changed for a different colour or higher brightness.
15. Reduces the cost of maintenance by reducing the need for a lift for high hanging lamps.
16. Eliminates the risk of a fire.

17. They can be connected even with a running current.
18. Hand made.
19. An Estonian product.
20. Registered trademark in Estonia ALPC14W
21. The schematics were designed in England
22. Temperature compensation. The current is reduced with the rising temperature, which increases the LED's life. The current and the brightness are increased with a decrease in temperature, whereas mercury lamps only go lower.
23. A photocell can be added to increase power for exterior light.
The brightness regulatory system of mercury lamps cost hundreds of Euros, so they are not very applicable. In addition, do not solve the problem of leakage of the poison from the ends of the tubes and in the disposal. Brightness LED bulbs today is the same with poisonous mercury but the price is much higher and the only one way to convince people to use them, is the introduction of LED lamps automatically adjust from ambient light in rooms with windows. About how to do this see in section CIRCUITS.

We offer information for the manufacture lamps or kits for the renovation of lighting fixtures with poisonous vapor mercury lamps :
    Energy class A ++

  Examples of use, see "WORKS".

Group of enthusiastic support site abbreviated AMELTA, called fully Anti Mercury ELevate TAlking, explain harm of lamps, disguised under varies names - "economical, fluorescent, compact, now even Induction, but in fact poisonous mercury-phosphor UV and shows how to make quality and maintainability of LED lamps, as sold not maintainable or repair will cost almost as a new lamp. But only long life justify the cost of buying.

Reliable circuits from the inexpensive and available in any electronics shop items designed by Amelta Ltd.